The injection mold consists of a movable mold and a fixed mold. The movable mold is installed on the moving template of the injection molding machine, and the fixed mold is installed on the fixed template of the injection molding machine. During injection molding, the movable mold and the fixed mold are closed to form a gating system and a cavity. When the mold is opened, the movable mold and the fixed mold are separated to take out the plastic product. In order to reduce the heavy workload of mold design and manufacturing, most of the injection molds use standard mold bases.

　　Buying plastic molds, assuming that you can choose a good company, you can save a lot of time for purchase, and the products you choose will be very good after all. There are many companies to choose from in the shopping mall, but many customers choose Hengxingchang directly. A very good company that produces plastic molds, from the initial design to the final product, can provide one-stop service, which can bring a lot of convenience to customers.

　　Gating system

　　The gating system refers to the part of the runner before the plastic enters the cavity from the nozzle, including the main runner, the cold material hole, the runner and the gate. The gating system, also known as the runner system, is a set of feeding channels that lead the plastic melt from the nozzle of the injection machine to the cavity. It is directly related to the molding quality and production efficiency of plastic products.

　　The main channel is a channel in the mold that connects the injection nozzle of the injection molding machine to the runner or cavity. The top of the sprue is concave for engagement with the nozzle. The inlet diameter of the main channel should be slightly larger than the diameter of the nozzle (0.8mm) to avoid overflow and prevent the two from being blocked due to inaccurate connection. The diameter of the inlet depends on the size of the product, generally 4-8mm. The diameter of the sprue should be expanded inward at an angle of 3° to 5° to facilitate the release of the runner debris.

　　The cold material hole is a hole at the end of the main channel to capture the cold material generated between two injections at the end of the nozzle, thereby preventing the blockage of the runner or gate. If the cold material is mixed into the cavity, internal stress is easily generated in the manufactured product. The diameter of the cold material hole is about 8-10mm and the depth is 6mm. In order to facilitate demoulding, the bottom is often borne by the demoulding rod. The top of the demoulding rod should be designed as a zigzag hook or a sunken groove, so that the sprue can be pulled out smoothly when demoulding.

　　The runner is the channel connecting the main runner and each cavity in the multi-slot die. In order to make the melt fill each cavity at the same speed, the arrangement of the runners on the mold should be symmetrical and equidistant. The shape and size of the runner section have an impact on the flow of the plastic melt, the demolding of the product and the ease of mold manufacturing.

　　If the flow of the same amount of material is considered, the flow channel resistance of the circular section is the smallest. However, because the specific surface of the cylindrical runner is small, it is not good for the cooling of the runner excess, and the runner must be opened on the two halves of the mold, which is labor-intensive and difficult to align.

　　Therefore, trapezoidal or semi-circular cross-section runners are often used, and are opened on half of the mold with ejector rods. The runner surface must be polished to reduce flow resistance and provide faster filling speed. The size of the runner depends on the type of plastic, the size and thickness of the product. For most thermoplastics, the cross-sectional width of the runner is not more than 8m, the extra large can reach 10-12m, and the extra small is 2-3m. Under the premise of meeting the needs, the cross-sectional area should be reduced as much as possible to increase the shunting duct debris and prolong the cooling time.

　　gate

　　It is the channel that connects the main channel (or shunt channel) and the cavity. The cross-sectional area of ​​the channel can be equal to the main channel (or branch channel), but it is usually reduced. Therefore, it is the part with the smallest cross-sectional area in the entire runner system. The shape and size of the gate have a great influence on the quality of the product.

　　The function of the gate is:

　　A. Control material flow speed:

　　B. During injection, the melt stored in this part can be prematurely solidified to prevent backflow:

　　C. The passing melt is subjected to strong shear to increase the temperature, thereby reducing the apparent viscosity to improve fluidity:

　　D. It is convenient to separate the product from the runner system. The design of gate shape, size and location depends on the nature of the plastic, the size and structure of the product. Generally, the cross-sectional shape of the gate is rectangular or circular, and the cross-sectional area should be small and the length should be short. This is not only based on the above effects, but also because it is easier for a small gate to become larger, while it is difficult to shrink a large gate. The gate position should generally be selected at the thickest part of the product without affecting the appearance.

　　The design of the gate size should take into account the properties of the plastic melt. Cavity It is the space in the mold for molding plastic products. The components used to form the cavity are collectively referred to as molded parts.

　　Each forming part often has a special name. The molding parts that constitute the shape of the product are called concave molds (also known as female molds), and those that constitute the internal shapes of the products (such as holes, grooves, etc.) are called cores or punches (also known as male molds). When designing a molded part, the overall structure of the cavity should be determined first according to the performance of the plastic, the geometry of the product, dimensional tolerances and usage requirements.

　　The second is to select the parting surface, the position of the gate and the exhaust hole and the demoulding method according to the determined structure.

　　Finally, the design of each part is carried out according to the size of the control product and the combination method of each part is determined. The plastic melt has a high pressure when it enters the cavity, so the molding parts should be reasonably selected and checked for strength and stiffness.

　　In order to ensure the surface of plastic products is smooth and beautiful and easy to demould, all surfaces in contact with plastics should have a roughness Ra>0.32um and be resistant to corrosion. Formed parts are generally heat treated to increase hardness and made of corrosion-resistant steel.

　　temperature control system

　　In order to meet the requirements of the injection process for the mold temperature, a temperature adjustment system is required to adjust the temperature of the mold. For injection molds for thermoplastics, the cooling system is mainly designed to cool the mold. The common method of mold cooling is to open a cooling water channel in the mold, and use the circulating cooling water to take away the heat of the mold; the heating of the mold can not only use the hot water or steam of the cooling water channel, but also install electricity in and around the mold. Heating element.