What categories are included in the technical requirements in the general assembly drawing of the switch and socket mold?
Release time:
2021-08-18 10:39
Source:
After drawing the sketch of the switch and socket mold, the mold design engineer will start to draw the general assembly drawing of the switch and socket mold assembly drawing. The general assembly drawing will generally indicate the mold size, name, material, shrinkage rate, special requirements, etc. It is important to indicate some technical requirements of the switch socket mold during the manufacturing process. for example:
①Performance requirements for some parts of the switch socket mold. For example, the assembly requirements for the ejector system and the slider core-pulling structure.
② Requirements for the assembly process of switch socket molds. For example, after the mold is assembled, the fitting gap between the parting surfaces should not be greater than 0.05mm; how high is the parallelism requirement on the top and bottom of the mold; or what is the size determined by the assembly, and so on.
Related news
Huizhou Shuanghui Precision Mould Products Co., Ltd.
TEL：+86-0752-2601579
Address: East side of the first floor of Building A, Block 39 (plant), Pingnan No. 48 Community, Zhongkai High-tech Zone, Huizhou City
Follow
Copyright © 2022 Huizhou Shuanghui Precision Mould Products Co., Ltd. All Rights Reserved
Power by:www.300.cn SEO NEWS
